Ideabytes IoT
Air Quality

Indoor/Outdoor air quality monitoring

Measure the air your people, patients and products depend on.

Good air, indoors and outdoors, keeps people comfortable and alert, protects sensitive products and helps buildings meet health and safety expectations. Ideabytes IoT brings air quality readings from every room and location into one dashboard, with alerts when conditions drift and reports for facility and compliance teams.

The challenge

  • Air quality varies from room to room and hour to hour
  • Poor ventilation often goes unnoticed until people complain
  • Hospitals, labs and clean areas need documented conditions
  • Facility teams need one view across buildings

How Ideabytes IoT helps

  • Sensors: CO₂, temperature and humidity sensors in each room, zone or outdoor location. PM2.5, PM10 and VOC sensors are also available
  • Connectivity: Wi-Fi, 4G M2M SIM or Ethernet, through MODBUS gateways or loggers
  • Alerts: Notifications when CO₂, temperature or humidity cross your limits
  • Reports: Room-by-room trends and reports for facility and compliance teams

Key benefits

  • Healthier and more comfortable spaces
  • Faster response to ventilation or HVAC problems
  • Records for audits and building certifications
  • One dashboard for every room and building

Recommended products

  • IBI-A-C485: CO₂ sensor (RS-485 MODBUS)
  • IBI-A-TH485: RS-485 temperature and humidity sensor
  • IBI-CSC50R / IBI-CSC50RM: Wi-Fi / 4G M2M SIM RS-485 MODBUS gateways
  • IBI-WTH50 / IBI-ETH50: Wi-Fi / Ethernet built-in temperature and humidity loggers for rooms

Products for Air Quality Monitoring

Every model reports to the Ideabytes Cloud Server. Alerts arrive by email and app push notification, with optional SMS, when a reading crosses a limit.

Showing 6 products

CO2 Sensor (RS-485 Modbus)
Sensors

IBI-A-C485 – CO2 Sensor (RS-485 Modbus)

CO2 Sensor (RS-485 Modbus)

  • The optical sensor does not depend on oxygen and has low cross-sensitivity to common indoor gases.
  • This sensor is factory calibrated for ppm-level accuracy and needs little recalibration under normal indoor conditions.

Frequently asked questions

What does the system measure?

CO₂, temperature and humidity, with the readings from each location shown together on one dashboard. PM2.5, PM10 and VOC sensors are also available; contact us for details.

Is it suitable for hospitals and offices?

Yes. It is used to watch conditions in rooms where comfort, safety or product quality depends on the air.

Do I need Wi-Fi in every room?

No. Sensors connect to a gateway over RS-485, and the gateway sends data over Wi-Fi or 4G M2M SIM.

Plan an air quality monitoring setup for your building

Tell us which rooms, zones or outdoor points you need to watch, and our team will recommend a setup.