
IBI-AGW – Edge Gateway – HDMI Out
Edge Gateway – HDMI Out
- Different views (dashboard / list), analytics, device management, user management, alerts management
- Remote control
Showing 1 products

Edge Gateway – HDMI Out
A data logger (also written datalogger) is an electronic device that measures a parameter such as temperature, humidity or CO₂ at set intervals and stores each reading with a time stamp, so you have a continuous record rather than occasional manual checks. An IoT data logger goes further and sends those readings to the cloud for live alerts and audit-ready reports. Ideabytes IoT has designed and manufactured data loggers in India since 2009 for pharma, cold chain, healthcare, laboratory and food businesses. The range covers Wi-Fi, 4G M2M, Ethernet, USB, Bluetooth and standalone loggers, plus IoT sensors and Modbus gateways, all backed by 21 CFR Part 11 compliant software.
Every data logger has three parts: a sensor that measures, memory that stores readings with a date and time, and a way to get the data out. Older loggers were read by plugging them into a computer after the event. A connected data logger system uploads readings as they happen, so a freezer that fails at 2 a.m. raises an alarm before stock is lost, and the record needed for an audit builds itself.
Ideabytes IoT designs its loggers, firmware and cloud platform in-house, with headquarters in Ottawa, Canada, a development centre in Hyderabad and manufacturing in India. The catalogue spans single- and dual-channel temperature loggers, temperature and humidity loggers, 4- and 8-channel PT100 loggers, GPS loggers for transport, IoT sensors, Modbus gateways and customised room-parameter logging systems.
Connectivity decides how readings leave the device and is usually the first choice to make. Each type has its own category page.
Choose by what you measure and over what range. Temperature data loggers with standard external probes run from −50°C to +120°C, and PT100 probes go down to −200°C for ultra-low freezers and process equipment. The −10°C to +50°C shown on the product cards is the band in which the ±0.5°C accuracy applies, not the full measuring range. Temperature and humidity loggers add relative humidity for warehouses, pharmacies and stability areas. Multi-channel PT100 loggers watch 4 or 8 points from one unit. GPS temperature data loggers add location for reefer trucks and vans. IoT sensors cover RS-485 Modbus temperature, humidity and CO₂, and Modbus gateways read existing cold room controllers, Dixell controllers and energy meters.
Custom requirements are handled too. The Wi-Fi and 4G customised room-parameter logging systems (IBI-WC-X and IBI-MC-X) are configured to the room parameters a site needs, with the same live alerts and reports. The Wi-Fi, 4G and Ethernet families all report into one cloud platform, so a site can mix connectivity and still work from one dashboard and one set of reports.
A logger is only as useful as the software behind it. Connected Ideabytes IoT loggers report into a cloud platform with web and mobile apps for iOS and Android, dashboard and list views, and user and device management. Alerts arrive by email and app push notification, with optional SMS, when a reading crosses a limit or a device goes offline. The platform produces 21 CFR Part 11 compliant PDF reports on demand or on a daily, weekly or monthly schedule, with audit trail, alarm log, trend graphs, mean kinetic temperature (MKT) and corrective and preventive action (CAPA) records. The default polling interval is 15 minutes and can be changed. Connected loggers keep readings in internal memory (90 days at 15-minute sampling on many models) and carry a rechargeable battery, so a network or power cut does not leave a gap in the record. Software features are offered in plans, and the sales team will match a plan to your audit needs.
The same core requirement, a trustworthy continuous record, runs through very different sites. What changes is the range, the number of points, the audit that applies and how quickly someone must act on an alarm, which is why the range is organised by connectivity and measurement rather than by industry.
Pharmaceutical manufacturers, distributors and warehouses working to GDP and 21 CFR Part 11.
Cold-chain and logistics operators moving vaccines, medicines and food.
Hospitals, pharmacies, blood banks and vaccine storage points.
Laboratories, research centres and stability chambers.
Food processing, retail and cold storage businesses following HACCP and FSSAI requirements.
Agriculture, greenhouses and data centres that need environmental monitoring.
The software supports 21 CFR Part 11 requirements, and reports include the electronic audit trail and alarm history that inspectors check first. Individual products carry the CE mark and FCC and IC (ISED Canada) approvals, as listed on each product page. NABL-traceable calibration certificates are available on request, which most Indian auditors expect for GMP, GDP, NABH and FSSAI inspections. Plan recalibration once a year, or sooner if your SOP requires it.
For regulated users, the software matters as much as the hardware. User management, an electronic audit trail, alarm logs and CAPA records for each excursion are what turn a wireless data logger into evidence that stands up in an inspection. Ask for a demonstration of the audit trail and a sample report before you shortlist.
Ideabytes IoT is GeM-registered, a RITES approved OEM and a Department of Telecommunications (DoT)-registered M2M service provider, so government hospitals, research institutes and public sector undertakings (PSUs) can buy through the Government e-Marketplace, and 4G loggers come with connectivity supplied. The HSN code for each model is shown on the quotation, which keeps purchase orders and GST invoices straightforward.
To buy, shortlist models by connectivity and measurement using the categories above, or compare products side by side. Then contact us or book an Expert Check, and the team will confirm probes, quantities, software plan and calibration before you order. Five questions narrow most requirements to two or three models, and the answers also make a GeM bid or an internal capex note easier to defend.
A data logger is a device that measures parameters such as temperature, humidity or CO₂ at fixed intervals and stores each reading with a time stamp. Connected data loggers also send readings to the cloud for live alerts and reports. They are used wherever a continuous, audit-ready record is required, from vaccine fridges to cold rooms and reefer trucks.
Choose Wi-Fi where site Wi-Fi is reliable, 4G M2M where there is no Wi-Fi or IT restricts the network, Ethernet for wired server rooms and cleanrooms, and USB or standalone loggers where live alerts are not needed, such as single shipments or air-gapped rooms. An Expert Check helps if you have a mix of sites.
The cost depends on the connectivity, the number of channels, the probe and range, the quantity and the software plan for alerts and 21 CFR Part 11 reports. A USB logger is the lowest-cost option and multi-channel 4G loggers sit at the other end. Share your application and number of monitoring points for an exact price.
Most Ideabytes IoT temperature data loggers are listed under HSN 90251990, and the HSN code for each model is shown on the quotation. The GST rate follows the HSN classification in force on the invoice date, so confirm it with your finance team or on the quotation.
NABL-traceable calibration certificates are available on request for every logger. Most pharma, hospital and food auditors in India expect a current certificate for each logger and annual recalibration, so ask for certificates with your order and note the renewal date.
Yes. Ideabytes IoT is registered on the Government e-Marketplace, so government hospitals, research institutes, universities and PSUs can buy through GeM. Share the specification you need and the team will point you to the matching listing or help you frame the requirement.
A data logger is the device that measures and records. A temperature monitoring system is loggers plus software: the cloud dashboard, alerts, user management and compliance reports. Ideabytes IoT connected loggers are supplied with that software, so a single logger or a site-wide network works as a complete monitoring system.
Answer a few questions and our team will confirm probes, quantities, software plan and calibration.